Categories
Manufacturers
Suppliers
- Fashion Supplier
List of products by manufacturer Enerpac
-
Enerpac HCG - 502 High tonnage cylinder
The Enerpac HCG - 502 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 50mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac THQ706T
The Enerpac THQ706T hoses are twin safety hoses for use with the Enerpac range of torque pumps and torque wrenches and are 6 Metres in length.
-
Enerpac RLT 41 Low height telescopic cylinder
The Enerpac RLT41 Low height, 3 stage telescopic cylinder has a 54mm collapsed height with the following capacities - lower stage 23.7 Tons with 11mm stroke, second stage 11.4 Tons with 7mm stroke and upper stage 4.4 Tons with 5mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RCH202 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 215kN lifting capacity and 49mm stroke. The RCH202 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 150cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac RAC202 Aluminium Cylinder
The Enerpac RAC202 has a capacity of 20t,a closed height of 174mm,an outside diameter of 85mm,a 50mm stroke and weighs only 3.6Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac XA12 Air powered pump
The Enerpac XA12 is a single acting pump from their high performance range of air driven, hydraulic foot pumps with a usable oil capacity of 2 Litres. The pump has a working pressure of 700bar (10,000 psi) and a flow rate of 2.0 Litre per minute at no load and 0.25 Litres per minute at 700bar. Supplied complete with test certificate traceable to...
-
Enerpac WR-15 Hydraulic wedge
The Enerpac WR-15 is a hydraulic wedge with a 0.75 ton capacity and a maximum spread of 292mm. The unit has a maximum working pressure of 700 bar and weighs 11.3Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 504 High tonnage cylinder
The Enerpac HCG – 504 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 100mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac P801 Hydraulic hand pump
The Enerpac P801 is a two speed, steel hand pump from their "Ultima" range giving a reduced handle effort to reduce operator fatigue. The pump has a working pressure of 700bar (10,000 psi), delivers 16.39cm3 of oil and 2.46cm3 of oil per handle stroke on the first & second stage respectively and has 4100cm3 of usable oil. Supplied complete with test...
-
Enerpac RCH302 Hydraulic cylinder
Hollow plunger, spring assisted return, single acting cylinder from the Enerpac RCH range with 326kN lifting capacity and 64mm stroke. The RCH302 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 298cm3. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCG - 506 High tonnage cylinder
The Enerpac HCG – 506 High tonnage cylinder is single acting, load return with a 50 ton lifting capacity and a 150mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RAC204 Aluminium Cylinder
The Enerpac RAC204 has a capacity of 20t, a closed height of 224mm,an outside diameter of 85mm,a 100mm stroke and weighs only 4.1Kgs. Suppled complete with test certificate traceable to national standards.