Categories
Manufacturers
Suppliers
- Fashion Supplier
List of products by manufacturer Enerpac
-
Enerpac HCRL5010 Double acting lock ring...
The Enerpac HCRL5010 double acting lock ring cylinder has a capacity of 50t, a collapsed height of 427mm, an outside diameter of 130mm and a 250mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac XC-1401MB Battery powered pump
The Enerpac XC1401MB is a double acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25 Litre per minute. The pump is supplied with two batteries and a 110 Volt charger and has a usable oil capacity of 1.0 Litre. Supplied complete with test certificate traceable to...
-
Enerpac XC-1401ME Battery Powered Pump
The Enerpac XC1401ME is a double acting pump from their cordless range of better pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25 litres per minute. The pump is supplied with two batteries and a 240 Volt charger and has a usable oil capacity of 1 Litre. Supplied complete with a test certificate traceable to...
-
Enerpac XC-1402MB Battery powered pump
The Enerpac XC1402MB is a double acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 litres per minute and a flow rate at 700 bar of 0.25 Litre per minute. The pump is supplied with two batteries and a 110 Volt charger and has a usable oil capacity of 2.0 Litres. Supplied complete with test certificate traceable to...
-
Enerpac XC-1402ME Battery Powered Pumpc
The Enerpac XC1402ME is a double acting pump from their cordless range of battery pumps giving a no load flow rate of 2.0 Litres per minute and a flow rate at 700 bar of 0.25 Litres per minute. The pump is supplied with two batteries and a 240 Volt charger and has a usable oil capacity of 2.0 litres. Supplied complete with a test certificate traceable...
-
Enerpac RR1006 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 933kN pushing / lifting capacity, 435kN pulling force with 168mm stroke. The RR1006 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 2238cm3 on the push side and 1045cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
Enerpac RT 3311 Telescopic Cylinder
The Enerpac RT3311 2 stage, telescopic cylinder has a collapsed height of 352mm with the following capacities - lower stage at 81 ton with 150mm stroke and second stage at 32 ton with 150mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCRL1006 Double acting lock ring...
The Enerpac HCRL1006 double acting lock ring cylinder has a capacity of 100t, a closed height of 346mm, an outside diameter of 185mm and a 150mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac HCRL1008 Double acting lock ring...
The Enerpac HCRL1008 double acting lock ring cylinder has a capacity of 100t, a closed height of 421mm, an outside diameter of 185mm and a 200mm stroke. Supplied complete with test certificate traceable to national standards.
-
Enerpac RR10013 Hydraulic cylinder
Double acting cylinder from the Enerpac RR range with 933kN pushing / lifting capacity, 435kN pulling force with 333mm stroke. The RR10013 has a working pressure of 700 bar (10,000 psi) and an oil capacity of 4439cm3 on the push side and 2071cm3 on the pull side. Supplied complete with test certificate traceable to national standards.
-
NC 5060 Enerpac hydraulic nut splitter 50...
The Enerpac NC 5060 Hydraulic nut splitter works at 700 bar and has a bolt range of M33 - M39 and a hexagon nut range of 50 - 60mm. The unit produces 490kN of force and weighs just 11.8 Kgs. Supplied complete with test certificate traceable to national standards.
-
Enerpac S1500X Torque Wrench
The Enerpac S1500X is a ¾” Square drive hydraulic torque wrench with a minimum torque @69bar of 195Nm (144Ft/Lbs) and a nominal maximum torque @690bar of 1952Nm (1440ft/Lbs). All X Edition torque tools are CE –ATEX declared and are shipped complete with calibration certificates.